KOMPARASI MODEL NUMERIK DAN FISIK PADA BANGUNAN PELIMPAH ALIRAN BEBAS DAN TERKONTROL : STUDI KASUS: BENDUNGAN LEUWIKERIS

Gerald Guntur Pandapotan Siregar; Budi  Prasetyo; R. Alfin Septya  Nugroho

doi:10.28932/jts.v18i2.4861

Authors

Gerald Guntur Pandapotan Siregar Ministry of Public Works and Public Housing of the Republic of Indonesia
Budi Prasetyo Ministry of Public Works and Public Housing of the Republic of Indonesia
R. Alfin Septya Nugroho Waskita Karya

DOI:

https://doi.org/10.28932/jts.v18i2.4861

Keywords:

Physical, Leuwikeris, Numerical, Spillway, Simulation

Abstract

The number of variables needed in the hydraulic structure design process is very difficult if all parameters are defined mathematically. Numerical model is one alternative that has been widely used by experts in solving these difficulties. This study was conducted to determine the ability of the numerical model implemented on the spillway structure of the Leuwikeris Dam to approach the physical model that had previously been carried out. Numerical simulations were performed using Open Foam software as a Computational Fluid Dynamics (CFD) tool. Simulations were carried out in three scenarios, namely on QPMF, Q1000, and Q100 discharge flows. Each scenario will review the water pressure force acting on the launch channel wall and the energy attenuation performance of the stilling basin. The results of the study show that the water elevation upstream of the spillway at the QPMF, Q1000, and Q100 discharge flows is in accordance with the results of the physical modeling that has been carried out. The water level elevation on the wall opposite the spillway and sluice gate needs to exceed the existing wall elevation for QPMF. If runoff during QPMF is not permitted, then the elevation of the top of the wall needs to be increased to an elevation of +155.00 m. The stilling basin has not been able to reduce the flow at the planned Q100 year discharge, so it is necessary to modify the existing design.

Downloads

Download data is not yet available.

References

Ahmed, S. S., & Aziz, Y. W. (2018). Numerical Modeling of Flow in Side Channel Spillway Using ANSYS-CFX. Zanco Journal of Pure and Applied Sciences, 30(1), 83-93. Accessed from: https://www.academia.edu/36946660/Numerical_Modeling_of_Flow_in_Side_Channel_Spillway_Using_ANSYS-CFX

Alam, R. R. R. (2018). Kajian Hidrolika Pelimpah Samping pada Model Fisik Bendungan Pasuruhan Kabupaten Magelang Provinsi Jawa Tengah dengan Skala 1: 60 (Doctoral dissertation, Universitas Brawijaya). Accessed from: http://repository.ub.ac.id/12870/1/Rizki%20Robbi%20Rahman%20Alam.pdf

Alfonsi, G. (2009). Reynolds-averaged Navier–Stokes Equations for Turbulence Modeling. Applied Mechanics Reviews, 62(4). DOI: https://doi.org/10.1115/1.3124648

Badanapuri, V. R. (2018). Design Principles that are Involved in the Design of Flow over an Ogee Crest Spillway. International Journal of Science and Research (IJSR), 8(8), 245-254. Accessed from: https://www.ijsr.net/archive/v8i8/ART2020136.pdf

Bargess, M. F., Lesmana, C., & Tallar, R. Y. (2019). Analisis Struktur Bendung dengan Metode Elemen Hingga. Jurnal Teknik Sipil, 5(1), 1-21. DOI: https://doi.org/10.28932/jts.v5i1.1309

Dehdar-Behbahani, S., & Parsaie, A. (2016). Numerical Modeling of Flow Pattern in Dam Spillway’s Guide Wall. Case study: Balaroud dam, Iran. Alexandria Engineering Journal, 55(1), 467-473. DOI: https://doi.org/10.1016/j.aej.2016.01.006

Devolder, B., Rauwoens, P., & Troch, P. (2017). Application of a Buoyancy-Modified k-? SST Turbulence Model to Simulate Wave Run-Up Around a Monopile Subjected to Regular Waves Using OpenFOAM®. Coastal Engineering, 125, 81-94. DOI: https://doi.org/10.1016/j.coastaleng.2017.04.004

Hirt, C. W., & Nichols, B. D. (1981). Volume of Fluid (VOF) Method for the Dynamics of Free Boundaries. Journal of Computational Physics, 39(1), 201-225. DOI: https://doi.org/10.1016/0021-9991(81)90145-5

Menter, F. R., Kuntz, M., & Langtry, R. (2003). Ten Years of Industrial Experience with the SST Turbulence Model. Turbulence, heat and mass transfer, 4(1), 625-632.

Rusche, H. (2003). Computational Fluid Dynamics of Dispersed Two-Phase Flows at High Phase Fractions (Doctoral dissertation, Imperial College London, (University of London). Accessed from: http://hdl.handle.net/10044/1/8110

Yildiz, A., Yarar, A., Kumcu, S. Y., & Marti, A. I. (2020). Numerical and ANFIS Modeling of Flow Over an Ogee-Crested Spillway. Applied Water Science, 10(4), 1-10. DOI: https://doi.org/10.1007/s13201-020-1177-4